Archive | linen RSS feed for this section

Diy Linen Lantern Lamp

27 May

You will need:

  • Linen fabric. We used Ada & Ina’s Lotta White and oatmeal 100% Linen fabrics.
  • The lamp cage & lamp cord
  • Hand sewing needle
  • Sewing supplies

For this tutorial we used the old Ikea Orgel lamp. If you don’t have this old Ikea lamp it’s ok to use any other lamp frame if available. Start by removing the paper around the lamp cage and clean them thoroughlyMeasure the circumference of the frame, prepare your fabric and cut to size.Dimensions of the fabric 84cm width and height about 65cm.  This includes the seam allowance. You can regulate the  height measure according to how tall you want your lamp to be. Turn the seam on the upper edge, pin in place and sew.

Repeat the same for long side seam, except don’t hem it or it will look too thick, just sew 1 cm away from the edge. Don’t need to finish the other edge. You will end up with a tube.

Fit the fabric on top of the frame and pin in place. Sew the fabric by hand onto the frame in four points. This should be enough to keep the fabric in place. We don’t want it  to look too finished.

From the unfinished edge measure about 20cm up and mark the point. Take the same color thread (length 50cm) as your fabric and with long stitches sew it around entire fabric starting from the place you measured and marked. With the thread in place pull and the the fabric will crinkle. Finish the thread securely so that the smocking will stay in place.

 

Feel free to share this project!

Just remember to link back to us: www.linenfabrics.co.uk/linen-aspirations

 

By Soile Makkonen

Linen tote bag tutorial

16 Apr

 

 

You will need:

 

Cut the fabric into 4 identical-sized pieces measuring 54 x 25 cm (21,2″ x 9,8″). You will need 2 pieces for each outer and lining fabric. Cut two opposite corners open from each pieces. These cuts will form a bottom for the bag. Place fabrics right sides together,  sew the side seams and the bottom seam together leaving the corners open. After you have sewn the 2 pieces together, open unsewn corners and fold so that the side and bottom seams are aligned. Repeat for both pouches and turn them right sides up.

Place the inner bag inside the outer bag wrong sides together. Finish the top edge of the bag by sewing  over the edge. Then fold the edge to the inside by 1/4 inch and iron. Fold the edge again 3/4 of an inch, iron and pin in place. Stitch around the top edge of the bag. Picture shows the black pocket which can be sewn into place in this stage  or also before fitting the pieces together. Pocket is measuring 9 cm x 10,5 cm (3,5″ x 4,1″).

Now sew  the straps . You will need two straps of leather  measuring 4 cm x 63 cm ( 1,5” x 24,8”) and two linen straps measuring 6 cm x 63 cm ( 2,3″ x 24,8″). Begin by folding the linen fabric on the leather. You can use an iron to help. Pin in place and sew from the both edges. Measure the center of the bag, attach the straps as far away from each other and  sew them firmly on place.

Feel free to share this project!

Just remember to link back to us: www.linenfabrics.co.uk/linen-aspirations

Fire blanket cover tutorial

9 Apr

 

This fire blanket cover tutorial is designed for blanket measuring 100 x 130 cm (39,4 x 51,2 “)

Begin by making a pattern height 43½cm x width 23cm (17,1″ x 9”) These measures include seam allowance. Cut the fabric in two identical-size pieces. We used Ada&Ina’s Chevron & Chervil white linen fabrics. Click images below to enlarge.

After your fabric is cut make a 2 ½ cm (1″) hem to the short edge of the fabric. Cut two pieces of velcro measuring 5cm (2″) and arrange them on top of the hem. Make sure they are on the same positions.

Sew two seams to secure the velcro and the hem. Turn the two fabrics right sides together and attach with needles. To form a pouch sew the long sides and finally the top edge of the fabric.

Turn the pouch right side up and sew the top edge. Then measure about 4cm (1,57″) from the edge and sew again. The eyelet will be  installed between these stitches. We used Prym eyelets and washers 14 mm diameter. Here’s also a great video how to do it yourself.